Pasteld CLI Implementation
Usage:
pasteld [options] Start Pastel Daemon
Options:
-?
This help message
-alerts
Receive and display P2P network alerts (default: 1)
-alertnotify=<cmd>
Execute command when a relevant alert is received or we see a really
long fork (%s in cmd is replaced by message)
-blocknotify=<cmd>
Execute command when the best block changes (%s in cmd is replaced by
block hash)
-checkblocks=<n>
How many blocks to check at startup (default: 288, 0 = all)
-checklevel=<n>
How thorough the block verification of -checkblocks is (0-4, default: 3)
-conf=<file>
Specify configuration file (default: pastel.conf)
-daemon
Run in the background as a daemon and accept commands
-datadir=<dir>
Specify data directory
-exportdir=<dir>
Specify directory to be used when exporting data
-dbcache=<n>
Set database cache size in megabytes (4 to 16384, default: 450)
-loadblock=<file>
Imports blocks from external blk000??.dat file on startup
-maxorphantx=<n>
Keep at most <n> unconnectable transactions in memory (default: 100)
-par=<n>
Set the number of script verification threads (-16 to 16, 0 = auto, <0 =
leave that many cores free, default: 0)
-pid=<file>
Specify pid file (default: pasteld.pid)
-prune=<n>
Reduce storage requirements by pruning (deleting) old blocks. This mode
disables wallet support and is incompatible with -txindex. Warning:
Reverting this setting requires re-downloading the entire blockchain.
(default: 0 = disable pruning blocks, >550 = target size in MiB to use
for block files)
-reindex
Rebuild block chain index from current blk000??.dat files on startup
-sysperms
Create new files with system default permissions, instead of umask 077
(only effective with disabled wallet functionality)
-txindex
Maintain a full transaction index, used by the getrawtransaction rpc
call (default: 0)
Connection options:
-addnode=<ip>
Add a node to connect to and attempt to keep the connection open
-banscore=<n>
Threshold for disconnecting misbehaving peers (default: 100)
-bantime=<n>
Number of seconds to keep misbehaving peers from reconnecting (default:
86400)
-bind=<addr>
Bind to given address and always listen on it. Use [host]:port notation
for IPv6
-connect=<ip>
Connect only to the specified node(s)
-discover
Discover own IP addresses (default: 1 when listening and no -externalip
or -proxy)
-dns
Allow DNS lookups for -addnode, -seednode and -connect (default: 1)
-dnsseed
Query for peer addresses via DNS lookup, if low on addresses (default: 1
unless -connect)
-externalip=<ip>
Specify your own public address
-forcednsseed
Always query for peer addresses via DNS lookup (default: 0)
-listen
Accept connections from outside (default: 1 if no -proxy or -connect)
-listenonion
Automatically create Tor hidden service (default: 1)
-maxconnections=<n>
Maintain at most <n> connections to peers (default: 125)
-maxreceivebuffer=<n>
Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)
-maxsendbuffer=<n>
Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)
-onion=<ip:port>
Use separate SOCKS5 proxy to reach peers via Tor hidden services
(default: -proxy)
-onlynet=<net>
Only connect to nodes in network <net> (ipv4, ipv6 or onion)
-permitbaremultisig
Relay non-P2SH multisig (default: 1)
-port=<port>
Listen for connections on <port> (default: 9933 or testnet: 19933)
-peerbloomfilters
Support filtering of blocks and transaction with Bloom filters (default:
1)
-proxy=<ip:port>
Connect through SOCKS5 proxy
-proxyrandomize
Randomize credentials for every proxy connection. This enables Tor
stream isolation (default: 1)
-seednode=<ip>
Connect to a node to retrieve peer addresses, and disconnect
-timeout=<n>
Specify connection timeout in milliseconds (minimum: 1, default: 5000)
-torcontrol=<ip>:<port>
Tor control port to use if onion listening enabled (default:
127.0.0.1:9051)
-torpassword=<pass>
Tor control port password (default: empty)
-whitebind=<addr>
Bind to given address and whitelist peers connecting to it. Use
[host]:port notation for IPv6
-whitelist=<netmask>
Whitelist peers connecting from the given netmask or IP address. Can be
specified multiple times. Whitelisted peers cannot be DoS banned and
their transactions are always relayed, even if they are already in the
mempool, useful e.g. for a gateway
Wallet options:
-disablewallet
Do not load the wallet and disable wallet RPC calls
-keypool=<n>
Set key pool size to <n> (default: 100)
-paytxfee=<amt>
Fee (in PSL/kB) to add to transactions you send (default: 0.00)
-rescan
Rescan the block chain for missing wallet transactions on startup
-salvagewallet
Attempt to recover private keys from a corrupt wallet.dat on startup
-sendfreetransactions
Send transactions as zero-fee transactions if possible (default: 0)
-spendzeroconfchange
Spend unconfirmed change when sending transactions (default: 1)
-txconfirmtarget=<n>
If paytxfee is not set, include enough fee so transactions begin
confirmation on average within n blocks (default: 2)
-txexpirydelta
Set the number of blocks after which a transaction that has not been
mined will become invalid (min: 4, default: 20)
-maxtxfee=<amt>
Maximum total fees (in PSL) to use in a single wallet transaction;
setting this too low may abort large transactions (default: 0.10)
-upgradewallet
Upgrade wallet to latest format on startup
-wallet=<file>
Specify wallet file (within data directory) (default: wallet.dat)
-walletbroadcast
Make the wallet broadcast transactions (default: 1)
-walletnotify=<cmd>
Execute command when a wallet transaction changes (%s in cmd is replaced
by TxID)
-zapwallettxes=<mode>
Delete all wallet transactions and only recover those parts of the
blockchain through -rescan on startup (1 = keep tx meta data e.g.
account owner and payment request information, 2 = drop tx meta data)
ZeroMQ notification options:
-zmqpubhashblock=<address>
Enable publish hash block in <address>
-zmqpubhashtx=<address>
Enable publish hash transaction in <address>
-zmqpubrawblock=<address>
Enable publish raw block in <address>
-zmqpubrawtx=<address>
Enable publish raw transaction in <address>
Debugging/Testing options:
-debug=<category>
Output debugging information (default: 0, supplying <category> is
optional). If <category> is not supplied or if <category> = 1, output
all debugging information. <category> can be: addrman, alert, bench,
coindb, compress, db, estimatefee, http, libevent, lock, mempool, net,
partitioncheck, pow, proxy, prune, rand, reindex, rpc, selectcoins, tor,
zmq, zrpc, zrpcunsafe (implies zrpc).
-experimentalfeatures
Enable use of experimental features
-help-debug
Show all debugging options (usage: --help -help-debug)
-logips
Include IP addresses in debug output (default: 0)
-logtimestamps
Prepend debug output with timestamp (default: 1)
-minrelaytxfee=<amt>
Fees (in PSL/kB) smaller than this are considered zero fee for relaying
(default: 0.001)
-printtoconsole
Send trace/debug info to console instead of debug.log file
-shrinkdebugfile
Shrink debug.log file on client startup (default: 1 when no -debug)
-testnet
Use the test network
Node relay options:
-datacarrier
Relay and mine data carrier transactions (default: 1)
-datacarriersize
Maximum size of data in data carrier transactions we relay and mine
(default: 80)
Block creation options:
-blockminsize=<n>
Set minimum block size in bytes (default: 0)
-blockmaxsize=<n>
Set maximum block size in bytes (default: 2000000)
-blockprioritysize=<n>
Set maximum size of high-priority/low-fee transactions in bytes
(default: 1000000)
RPC server options:
-server
Accept command line and JSON-RPC commands
-rest
Accept public REST requests (default: 0)
-rpcbind=<addr>
Bind to given address to listen for JSON-RPC connections. Use
[host]:port notation for IPv6. This option can be specified multiple
times (default: bind to all interfaces)
-rpcuser=<user>
Username for JSON-RPC connections
-rpcpassword=<pw>
Password for JSON-RPC connections
-rpcport=<port>
Listen for JSON-RPC connections on <port> (default: 9932 or testnet:
19932)
-rpcallowip=<ip>
Allow JSON-RPC connections from specified source. Valid for <ip> are a
single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0)
or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified
multiple times
-rpcthreads=<n>
Set the number of threads to service RPC calls (default: 4)
Metrics Options (only if -daemon and -printtoconsole are not set):
-showmetrics
Show metrics on stdout (default: 1 if running in a console, 0 otherwise)
-metricsui
Set to 1 for a persistent metrics screen, 0 for sequential metrics
output (default: 1 if running in a console, 0 otherwise)
-metricsrefreshtime
Number of seconds between metrics refreshes (default: 1 if running in a
console, 600 otherwise)
Last modified 1yr ago